Een origineel cadeau voor onder de kerstboom? Bekijk onze giftcards! Klik hier

Denali led / soundbomb

View as:

Showing all 7 results

In winkelmand

12v 2x USB oplader incl voltmeter €19,99

Plug & play 12 volt USB oplader met ingebouwde voltmeter.

2 sterke uitgangen ( 2x 2.1A )
Voltmeter
Gezekerde bekabeling met 2 oogjes voor op de batterij aan te sluiten
Afdek kapje voor geen water binnen te laten
In winkelmand
Denali power module ( 6x 12v circuit ) €159,99
Gedaan met overbodige kabels, zekeringhouders,..

MUST HAVE voor de rijder die accessoires wil aansluiten.
Easy, plug & play systeem voor tot 6 verschillende 12 volt circuits te schakelen, zowel voor als na het contact.
Simpel te verzetten door gewoon de zekering te versteken. Komt volledig inclusief bekabeling, klaar om te installeren.

The PowerHub2 Power Distribution Module, manufactured by Denali, allows you to safely connect up to 6 electronic devices to your motorcycle in a clean, workmanlike manner. It is CANbus compatible and includes six 15-amp rated and fused outputs, six ground posts, and a plug-and-play wiring harness for direct battery hookup. Each of the six outputs can be individually set as “always on” or “switched” on/off with the ignition of the motorcycle. Instead of attaching multiple ring terminals to your battery, use a PowerHub2!

Denali designed the CANbus-safe PowerHub2 to allow simple and easy installation of electrical components. Each unit has six individually fused outputs. These are not your ordinary outputs. Simply plug the fuse in to the left or the right on the circuit board to make the accessory live all of the time or switched on/off with the bike’s ignition. The entire unit is rated for 30 Amps (360 watts). Each of the six circuits can handle up to 15A (180W) each – without exceeding a total sum of 30 Amps simultaneously.

Features:
- Water-resistant, compact & durable
- Replaceable 30 amp Tyco/Bosch micro relay
- Choice between switched and constant power
- 6 circuits can handle up to 15A (180W) each
- CANbus-compatible
- Dimensions: 76 x101x25mm
- Made in the USA
Includes:
- PowerHub2 fuse block
- 1,5m long wiring harness for connecting PowerHub2 to battery (includes switched “trigger” wire with Posi-tap connector)
- Self-adhesive hook and loop pad for providing a quick-release attachment method for connecting the PowerHub2 to a flat surface
- 2 ring terminals, zip ties
In winkelmand
Denali SOUNDBOMB compacte hoorn 120DB €64,95
Omschrijving
Producing an earsplitting 120 decibels of sound, the SoundBomb is 4 times louder than a standard motorcycle horn! The Denali™ SoundBomb was designed for those who want to be heard, but still want to maintain a stylish look. Thanks to its compact design and blacked-out housing, the SoundBomb will practically disappear once installed.

The unique design of the Denali compact horn features a rugged molded clamp that mechanically mates the compressor to the acoustic unit. This makes the SoundBomb virtually indestructible even in high vibration applications. Compatible with all CANbus electrical systems.

Specifications:
- Sound Output: 120 dB at 1m
- Current Draw: 20 Amp
- Dimensions: 137x116x86mm
- Stylish All Black Design
- CANbus compatible
Included:
- Single Piece Electro-Pneumatic Horn
- 12 volt, 30 amp relay
In winkelmand

DENALI SoundBomb Horn universele bekabelings-kit €33,40

Omschrijving

Easy and inexpensive Plug-N-Play wiring kit for Denali SoundBomb Horn that does not require any cutting, soldering, slicing or crimping as long as the original horn has blade-style electrical connections. If the original horn does not have blade-style electrical connections, the original horn connector needs to be removed and replaced with female spade connectors in order to use this harness

For use with Denali SoundBomb Dual-Tone Air Horn, but can also be used with other replacement horns.
In winkelmand

Denali Soundbomb montage-kit model-specifiek €0,01

Model specifieke montagekits.

De Soundbomb is uiteraard universeel op andere modellen ook te monteren.
Ook zijn er montage kits beschikbaar voor op de valbeugels.
Prijzen variëren van model tot model. Kies het jouwe uit de lijst.

Komt met alle benodigdheden om te installeren ( beugels, bouten, moeren,.. )
In winkelmand
DENALI SoundBomb Split 120dB €69,99
Omschrijving
The DENALI SoundBomb split dual-tone air horn produces an earsplitting 120 decibels of sound (four times louder than your typical motorcycle horn!) in a compact two piece design for motorcycles that have a limited amount of space. Ear splitting performance demands attention to make your presence known and keep you safe from traffic that might have failed to notice.

The lightweight components can be securely mounted with cable ties. For maximum safety the compact compressor instantly supplies air to the trumpet by pressing the factory horn button. An upgraded Plug-N-Play Wiring Kit is highly recommended and simple to connect.

Features:
- Sleek all black construction
- Tank-less design means no compressed air storage tank to run dry
- Instant performance with no delay in sound output
- Compressor & trumpet are separate units for installation where space is limited
- Ear splitting performance equal to the DENALI Compact Air Horn
- Intended for motorcycles with limited space
- Great mounting solution for motorcycles with or without fairings
- Can be mounted behind bodywork without inhibiting performance
- Utilizes the factory horn button
Specs:
- 120 Decibels at 3 feet
- Operating Voltage: 12V
- Power Draw: 20 amps
- Size (Compressor): 4.5″ x 2.9″ x 3.0″
- Size (Acoustic Unit): 4.1″ x 3.7″ x 3.4″
- Housing: Two Part Design
What’s in the box:
- Two Piece Electro-Pneumatic Horn
- 12 volt, 30 amp relay
- Heat resistant air hose
- Compressor Mounting Hardware
- Acoustic unit mounting hardware
In winkelmand
Denali soundbomb universele montagekit voor valbeugels €55,83
Omschrijving
This DENALI SoundBomb Compact horn mount kit allows fitment of the horn to engine guards, crash bars, or any tube 21mm-29mm in diameter. The clamp has a unique octagonal inner profile that allows the mount to securely grip a wide range of tube diameters and includes a fully rotatable mounting shelf to create a super versatile and robust horn mounting solution.

Features:
- Adjustable grip range 21mm-39mm
- Rotatable mounting shelf creates 4th axis of adjustability
- Accepts M8 bolt from DENALI SoundBomb horns
- Billet aluminum with hard anodized black finish
Included:
- 1x mounting clamp
- 1x rotatable mounting shelf
- Assembly hardware
- Installation instructions